Door Design · J-2055
Wood-Grain Armored Door with Black Pull
J-2055 wraps an armored leaf in a natural wood grain and sets a long black pull against it, so the entrance gains the warmth of timber with the weight of steel. Built to order in steel system with aluminum trim, J-2055 takes its 70 mm leaf and 90 mm frame from the opening survey rather than a stock size, with the powder-coated steel with a lacquered or wood-grain face approved on a physical sample.
70 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.
Discuss This DesignWhy this design works
- Natural wood-grain wrap on an armored leaf
- Elongated black pull sets the vertical line
- Grain continues across the frame reveal
Design details
- Style
- Warm armored
- Material / system
- Steel system with aluminum trim
- Configuration
- Single door
- Door leaf thickness
- 70 mm
- Frame depth
- 90 mm
- Maximum frame sizes by configuration
- Single: 1200 × 3000 mm; unequal double: 1600 × 3000 mm; equal double: 2200 × 3000 mm (overall frame; family limits)
- Core filling
- Aluminum honeycomb or foam filling, selectable
- Glass
- None, wood-grain panel
- Locking
- Multi-point lock with anti-drill cylinder
- Smart lock
- Smart lock compatible
Warm Grain, Heavy Leaf: Keeping Both Readable
On a 70 mm armoured leaf the wood grain is the only thing suggesting timber, and that means it has to be continuous. Transfer grain has a start and an end, so on a 2.4 m leaf the pattern is laid to run the full height without a mirrored joint in the middle — a mirror line is the giveaway that the grain is printed rather than sawn, and it is the detail people notice without being able to name.
The long black pull is a hard line against that warmth, and it only works if it follows the grain rather than crossing it: a vertical bar reads as part of the composition, a horizontal one cuts the door in half. Black also gives the face a fixed reference for the grain's warmth, which is why a very dark pull on a mid-tone grain reads more expensive than a matching one — the contrast is doing the work the panel layout would otherwise have to do.
Specification & ordering
Steel Entry Door Specifications and Ordering
Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.
Maximum Frame Sizes by Door Construction
Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.
| Door construction | Single leaf | Unequal double leaf | Equal double leaf |
|---|---|---|---|
| Steel-Core Armored Doors | 1200 × 3000 mm | 1600 × 3000 mm | 2200 × 3000 mm |
These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.
Technical specification
- Door leaf
- 1.0 mm galvanized steel sheet
- Frame
- 2.0 mm galvanized steel
- Core
- Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
- Configuration
- Single or double leaf, with or without glass
- Glazing
- None, wood-grain panel
- Finish
- Wood-grain transfer, powder coat or custom finish
Ordering & supply
- Minimum order quantity
- 1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
- Sample lead time
- 25 days
- Production lead time
- 30–45 days
- Container loading
- Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
- Factory inspection
- Third-party factory inspection welcome
- Trade terms
- FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
- Warranty
- 3 years on structure; 1 year on hardware and electronic lock components
Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size.
Image gallery
Frequently asked questions
Is the wood grain real timber?
It is a heat-transfer grain on a coated steel face, so it will not lift or need refinishing.
Can the grain run horizontally?
Yes, the direction is a manufacture decision and can be rotated.
Can this design be custom sized?
Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.
Which materials and finishes are available?
This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.
How do I specify this door for a project?
Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.
Related collections
Planning an entrance around this design?
Share your opening dimensions, finish preferences and configuration needs with our team.
Start an inquiry
Jmr-015
Jmr-018
Jmr-3107