Modern Entry Doors

Custom modern front doors built to project dimensions, with clean architectural lines, custom finishes and aluminum or steel entrance systems.

Custom sizes · Aluminum and steel systems · Glass options · Custom finishes

JMR-3610 modern entrance door

Construction

The Surface Is the Design, and Four Finishes Age in Four Different Ways

On a modern entrance the panel is flat, the sightline is thin and there is no moulding to read. What is left is the surface, which means the finish is doing the design work and also taking the weather. The four finishes offered here, 3D-printed texture, fluorocarbon coating, powder coating and wood-grain transfer, are not four colours of the same thing. They differ in how they fail, how long they hold colour, and whether a damaged area can be repaired on site.

01

Powder coating is a film, and a film chips at an edge

A polyester powder is sprayed and cured into a continuous film typically 60 to 80 microns thick. It is hard, uniform and available in any colour, and it is the most economical way to get a flat matte face. Its weakness is mechanical rather than chemical: the film is thin enough that an impact at an arris exposes bare aluminium, and once that happens the coating cannot stop the exposed metal from oxidising under it. On a sheltered entrance it lasts well; on a coastal elevation it depends entirely on the substrate preparation beneath.

02

Fluorocarbon is a chemistry, and it holds colour under UV

A fluorocarbon coating built on a high-ratio PVDF resin holds gloss and colour far longer than polyester under sustained ultraviolet, because the fluorine-carbon bond in the resin is not broken by the same wavelengths. It is applied thinner than powder, which makes surface preparation more critical, not less. The failure mode is chalking and slow colour shift over many years rather than chipping, and it is the finish to specify where a dark colour on a sun-facing elevation has to stay the same dark colour. Where that matters, the coating system should be named at inquiry rather than chosen from a card at order.

03

Texture and grain are layers, so wear shows at the handle first

A printed three-dimensional texture or a wood-grain transfer gives depth that a single-colour coating cannot, and it hides handling marks and light scratches very well. The trade-off is that it is a layer on the face, so the places that wear are predictable: around the handle, along the leading edge, and where a bag or a key habitually touches. A deep scratch in a textured face cannot be polished out and cannot be touched in to match. On those finishes the sensible assumption is panel replacement rather than repair.

Production base
Wuyi, Jinhua
Production floor area
15,000 m²
Production team
300+
Monthly capacity
2,000 doors

Door production started in 2012. The plant holds ISO 9001 and ISO 14001, ships to more than 30 countries across the US, Australia and the Middle East, and runs a 72-hour salt-spray check on plated and coated hardware, which is 304 stainless on exterior specifications.

Configurations

Modern Front Door Designs

Choosing a Modern Front Door

Compare modern entrance doors by panel layout, material, glazing and handle design, with each entrance built around project dimensions.

Modern Front Doors with Glass

Integrated glass configurations for natural light and contemporary entrances.

Modern Double Front Doors

Double-door configurations for wider modern entrance openings.

Built to Your Project

Custom Modern Entry Doors

Send us your opening dimensions, drawings or reference images. We manufacture modern entrance doors around the dimensions, materials and design requirements of your project.

  • SizeCustom-built to your opening dimensions.
  • Door SystemPivot or hinged configurations.
  • MaterialAluminum or steel systems.
  • GlassClear, Low-E, frosted or laminated options.
  • FinishWood-look, powder-coated and custom colors.
  • ConfigurationSingle, double, glass and sidelight layouts.

Specifying smart hardware? Read the future of smart entry doors.

Choosing Your Entrance

Contemporary Front Doors: Choose the Whole Entrance

Modern entry doors work best when panel proportions, handle position and the surrounding glass are designed together. Choose the appearance first, then check that the material and opening method suit the project.

Modern front doors with glass or a solid face

A solid panel keeps attention on finish and hardware; glass or sidelights bring daylight into the hall. Compare the privacy texture, door-leaf proportions and position of any fixed panels before choosing a design. A minimalist surface can be made in steel or aluminum, so appearance alone does not identify the material.

Modern double front doors or a pivot entrance

Double doors divide a wider opening into two leaves. A pivot entrance uses an offset turning point and requires clearance on both sides. For oversized front doors, review passage width, swing space and structural support before selecting the opening arrangement.

Specification & ordering

Modern Entrance Door Specifications and Ordering

On a flush modern leaf the surface finish is the design, so the finish process is specified explicitly rather than left as a colour reference.

Maximum Frame Sizes by Door Construction

Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.

Door constructionSingle leafUnequal double leafEqual double leaf
Steel Entry Doors1180 × 2500 mm1580 × 2500 mm2180 × 2500 mm
Steel-Core Armored Doors1200 × 3000 mm1600 × 3000 mm2200 × 3000 mm
Thermal-Break Aluminum Doors1200 × 3500 mm1600 × 3500 mm2300 × 3500 mm
Non-Thermal-Break Aluminum Doors1200 × 3500 mm1600 × 3500 mm2300 × 3500 mm

These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.

Technical specification

Surface finish
3D-printed texture, fluorocarbon coating, powder coating or wood-grain transfer
Material
Aluminum or steel
Configuration
Single leaf, double leaf or pivot
Glazing
Optional; clear, Low-E, frosted or laminated

Ordering & supply

Minimum order quantity
1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
Sample lead time
25 days
Production lead time
30–45 days
Container loading
Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
Factory inspection
Third-party factory inspection welcome
Trade terms
FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
Warranty
3 years on structure; 1 year on hardware and electronic lock components

Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size.

Specifying

Choosing a Modern Entrance Finish for the Climate It Will Live In

The swatch book answers the wrong question. On a flat panel, finish is a service-life decision that happens to be visible, and the three choices below are what determine whether the elevation still reads as designed after a decade.

01

Choose by UV hours and salt, not by the sample

A south or west elevation in a high-ultraviolet climate and a coastal site with salt-laden air are the two conditions that separate these finishes fastest. Powder coating is the right answer under an overhang or on a shaded elevation where cost matters and the face is protected. Fluorocarbon earns its premium where a saturated or dark colour faces the sun, because colour shift on a dark panel is far more visible than on a light one. A sample held indoors tells you nothing about either.

02

Ask what happens to the surface in year eight

Every finish reaches a point where it needs attention, and the useful question is what attention costs. A powder-coated panel can be touched in locally with an air-dry repair and will read acceptably from a metre away. A fluorocarbon face is harder to blend and usually wants a full-leaf refinish. A textured or grained face generally wants a new panel. Deciding which of those you are prepared to live with is a more honest basis for the choice than a gloss reading at handover.

03

Send the elevation, the orientation and a full-height photo of the reveal

Dark colours on a sun-facing leaf reach high surface temperatures and move more than light ones, and the same colour reads very differently in a shaded porch than in direct light. Where the entrance sits in a deep reveal, the leaf spends most of the day in shadow and the finish choice matters far less than the detail of the frame. A photograph of the reveal, taken at full height, says more about that than any drawing.

On site

Keeping a Flat Panel Clean Through a Build Programme

A modern entrance has no moulding to hide a mark. On a flat, thin-sightline elevation every site handling error is legible, and the three below are the ones that show up on handover day.

01

Protective film left on in the sun

The same film that protects a coated panel in transit becomes a staining risk the moment the panel is in direct sun. Adhesive migrates into the coating and leaves a faint outline of the sheet that no solvent lifts without dulling the surface. Strip it on the day the leaf is hung; if the entrance has to stand unfinished for weeks, cover it with a breathable sheet instead of leaving the film on.

02

Site touch-up with the wrong sheen

A matte face touched up with a gloss repair looks worse than the chip it was meant to hide, particularly in raking light. Where a repair is needed, the sheen matters as much as the colour, and on a textured or grained face neither can be matched in situ. Agree before handover which marks are acceptable as touched-in and which require a panel replacement, because that decision is much harder to make afterwards.

03

A fixing through the face

Anything screwed through a flat aluminum face leaves a visible fastener, a thermal bridge and a corrosion point in one operation. Fixings belong behind the panel or in the frame, and where a site condition demands a face fixing, it should be agreed with the factory before the hole is drilled. On an insulated panel a face fixing also penetrates the thermal break, and the cold spot it creates is where condensation appears first.

Modern Front Doors FAQ

Can modern front doors be custom sized?

Yes. Each modern entrance door is built to your opening dimensions.

What materials are available for modern entry doors?

Modern entry doors are available in aluminum and steel systems, with wood-look, powder-coated and custom finishes.

Can modern front doors include glass?

Yes. Glass configurations can be integrated into modern front doors for natural light and a contemporary look.

Can you make modern double front doors?

Yes. Modern double front doors are available for wider entrance openings.

Can modern entrance doors include sidelights?

Yes. Sidelights can be combined with a modern entrance door in single or double layouts.

Start Your Project

Have a Modern Entrance Door Project?

Send us your dimensions, drawing or reference image. We'll review your requirements and recommend a suitable entrance door configuration.