Door Design · Jmr-3107
Full-Height Armored Door with Number Plaque
Jmr-3107 runs the leaf to full height and sets the house number into the face, so the entrance carries its own signage without a separate plate on the wall. Each Jmr-3107 is made to the project opening: 70 mm leaf, 90 mm frame, steel system with an aluminum trim. The powder-coated steel with a lacquered or wood-grain face can be matched to the existing facade before production.
70 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.
Discuss This DesignWhy this design works
- Full-height leaf, no transom joint
- House number integrated into the door face
- Concealed hinges keep the reveal clean
Design details
- Style
- Armored minimal
- Material / system
- Steel system with aluminum trim
- Configuration
- Single door, full height
- Door leaf thickness
- 70 mm
- Frame depth
- 90 mm
- Maximum frame sizes by configuration
- Single: 1200 × 3000 mm; unequal double: 1600 × 3000 mm; equal double: 2200 × 3000 mm (overall frame; family limits)
- Core filling
- Aluminum honeycomb or foam filling, selectable
- Glass
- None, solid panel
- Locking
- Multi-point lock with anti-drill cylinder
- Smart lock
- Smart lock compatible
Setting the House Number Into the Leaf
A number cut into the face is a hole in the skin, so behind it there has to be something that keeps the core closed and stops water tracking into the leaf. That backing, and the exact digit positions, are set with the door: the digits are spaced to the leaf width and placed at a legible height, and none of it is drilled on site.
Because the leaf runs full height, there is no transom or rail to break the elevation, which leaves the number as the only element on the face. That makes its position relative to the pull and the lock a composition rather than an address detail — too close to the pull and the two collide, too high and it stops being readable from the gate. Full height also means the leaf is at the top of what the hinges are sized for, so the number's position does not affect structure, but the leaf weight does.
Specification & ordering
Steel Entry Door Specifications and Ordering
Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.
Maximum Frame Sizes by Door Construction
Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.
| Door construction | Single leaf | Unequal double leaf | Equal double leaf |
|---|---|---|---|
| Steel-Core Armored Doors | 1200 × 3000 mm | 1600 × 3000 mm | 2200 × 3000 mm |
These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.
Technical specification
- Door leaf
- 1.0 mm galvanized steel sheet
- Frame
- 2.0 mm galvanized steel
- Core
- Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
- Configuration
- Single or double leaf, with or without glass
- Glazing
- None, solid panel
- Finish
- Wood-grain transfer, powder coat or custom finish
Ordering & supply
- Minimum order quantity
- 1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
- Sample lead time
- 25 days
- Production lead time
- 30–45 days
- Container loading
- Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
- Factory inspection
- Third-party factory inspection welcome
- Trade terms
- FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
- Warranty
- 3 years on structure; 1 year on hardware and electronic lock components
Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size.
Image gallery
Frequently asked questions
Can the plaque carry a name as well as a number?
Yes, the plaque is machined to your text and finish before assembly.
Is a full-height leaf heavy to use?
The leaf runs on concealed heavy-duty hinges sized for the height, with an optional closer.
Can this design be custom sized?
Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.
Which materials and finishes are available?
This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.
How do I specify this door for a project?
Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.
Related collections
Planning an entrance around this design?
Share your opening dimensions, finish preferences and configuration needs with our team.
Start an inquiry
Jmr-015
Jmr-018
J-2055