Door Design · JMR-3670
Classic Armored Door with Ring Knockers
Jmr-3670 builds a traditional panel layout into an armored leaf and finishes it in deep black, with ring knockers that give the entrance its period reference. Built to order in steel system with aluminum trim, Jmr-3670 takes its 70 mm leaf and 90 mm frame from the opening survey rather than a stock size, with the powder-coated steel with a lacquered or wood-grain face approved on a physical sample.
70 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.
Discuss This DesignWhy this design works
- Classical panel layout, armored core
- Ring knockers in a matched metal finish
- Available as a single or double assembly
Design details
- Style
- Classical panel
- Material / system
- Steel system with aluminum trim
- Configuration
- Single or double door
- Door leaf thickness
- 70 mm
- Frame depth
- 90 mm
- Maximum frame sizes by configuration
- Single: 1200 × 3000 mm; unequal double: 1600 × 3000 mm; equal double: 2200 × 3000 mm (overall frame; family limits)
- Core filling
- Aluminum honeycomb or foam filling, selectable
- Glass
- None, panelled face
- Locking
- Multi-point lock with anti-drill cylinder
- Smart lock
- Smart lock compatible
Ring Knockers and the Panel Layout They Belong To
Ring knockers are a period reference, and they only read correctly against a panel layout that has a defined centre rail to hang them from. On a flat door they look like hardware dropped onto a surface; on this layout they sit in the field between two mouldings, which is where a knocker would have been on the timber door the design refers to. Their height follows the middle rail, not a standard door height.
Deep black changes how the panels read. The mouldings catch light along their edges while the recesses go fully dark, so the relief looks deeper than it measures — and any softness in a moulding edge, which would be invisible in a mid-tone, shows up in black as a highlight that looks like a paint defect. That is why the profile edges are checked before the finish goes on, and why black is the least forgiving colour in the collection to produce.
Specification & ordering
Steel Entry Door Specifications and Ordering
Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.
Maximum Frame Sizes by Door Construction
Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.
| Door construction | Single leaf | Unequal double leaf | Equal double leaf |
|---|---|---|---|
| Steel-Core Armored Doors | 1200 × 3000 mm | 1600 × 3000 mm | 2200 × 3000 mm |
These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.
Technical specification
- Door leaf
- 1.0 mm galvanized steel sheet
- Frame
- 2.0 mm galvanized steel
- Core
- Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
- Configuration
- Single or double leaf, with or without glass
- Glazing
- None, panelled face
- Finish
- Wood-grain transfer, powder coat or custom finish
Ordering & supply
- Minimum order quantity
- 1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
- Sample lead time
- 25 days
- Production lead time
- 30–45 days
- Container loading
- Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
- Factory inspection
- Third-party factory inspection welcome
- Trade terms
- FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
- Warranty
- 3 years on structure; 1 year on hardware and electronic lock components
Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size.
Image gallery
Frequently asked questions
Are the knockers functional?
They are working knockers with a strike plate, not applied ornament.
Can the panel mouldings be simplified?
Yes, moulding depth and count are set from your reference elevation.
Can this design be custom sized?
Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.
Which materials and finishes are available?
This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.
How do I specify this door for a project?
Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.
Related collections
Planning an entrance around this design?
Share your opening dimensions, finish preferences and configuration needs with our team.
Start an inquiry
Jmr-015
Jmr-018
Jmr-3107