Door Design · J-2008
Textured Steel Door with Architectural Handle
J-2008 gives the leaf a fine surface texture and pairs it with an architectural pull, so the entrance holds detail at close range and stays quiet from the kerb. J-2008 is manufactured as a single door on a steel system with an aluminum trim. Nothing is cut until the opening is surveyed, and the powder-coated steel with a lacquered or wood-grain face is signed off against a sample.
70 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.
Discuss This DesignWhy this design works
- Fine surface texture across the full leaf
- Architectural pull aligned with the texture grain
- Steel build suited to exposed elevations
Design details
- Style
- Architectural textured
- Material / system
- Steel system with aluminum trim
- Configuration
- Single door
- Door leaf thickness
- 70 mm
- Frame depth
- 90 mm
- Maximum frame sizes by configuration
- Single: 1180 × 2500 mm; unequal double: 1580 × 2500 mm; equal double: 2180 × 2500 mm (overall frame; family limits)
- Core filling
- Aluminum honeycomb or foam filling, selectable
- Glass
- None, textured panel
- Locking
- Multi-point lock with anti-drill cylinder
- Smart lock
- Smart lock compatible
Texture That Reads at 300 mm and Disappears at 10 m
The texture on this leaf is a close-range detail. Standing at the door, the surface picks up light unevenly and the panel feels made; from the pavement it reads as a flat matte face and nothing more. That is not a fault, but it does set the job the rest of the design has to do: at street distance the entrance is carried by its proportion and by the handle, because the texture has already stopped working.
Two practical consequences follow. A textured face traps dust and water in its valleys, so a mid or dark colour will show a season's weathering where a light one would not. And the texture limits where a pull can sit flat: any flush or inset hardware needs a locally smoothed area, which is why a proud architectural pull suits this face better than a recessed one.
Specification & ordering
Steel Entry Door Specifications and Ordering
Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.
Maximum Frame Sizes by Door Construction
Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.
| Door construction | Single leaf | Unequal double leaf | Equal double leaf |
|---|---|---|---|
| Steel Entry Doors | 1180 × 2500 mm | 1580 × 2500 mm | 2180 × 2500 mm |
These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.
Technical specification
- Door leaf
- 1.0 mm galvanized steel sheet
- Frame
- 2.0 mm galvanized steel
- Core
- Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
- Configuration
- Single or double leaf, with or without glass
- Glazing
- None, textured panel
- Finish
- Wood-grain transfer, powder coat or custom finish
Ordering & supply
- Minimum order quantity
- 1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
- Sample lead time
- 25 days
- Production lead time
- 30–45 days
- Container loading
- Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
- Factory inspection
- Third-party factory inspection welcome
- Trade terms
- FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
- Warranty
- 3 years on structure; 1 year on hardware and electronic lock components
Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size.
Image gallery
Frequently asked questions
What does the texture feel like?
A fine, even grain that reads as matte from a distance and as detail at hand height.
Can the texture be used on the frame too?
Yes, the frame can be finished to match so the reveal reads continuous.
Can this design be custom sized?
Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.
Which materials and finishes are available?
This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.
How do I specify this door for a project?
Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.
Related collections
Planning an entrance around this design?
Share your opening dimensions, finish preferences and configuration needs with our team.
Start an inquiry
Jmr-2003
JMR-2103
Jmr-2110