Door Design · Jmr-2110
Entrance Door with Horizontal Statement Pull
Jmr-2110 uses one long horizontal pull to set the proportion of the whole entrance, so a plain face gains a measured, architectural line at hand height. Built to order in steel system with aluminum trim, Jmr-2110 takes its 70 mm leaf and 90 mm frame from the opening survey rather than a stock size, with the powder-coated steel with a lacquered or wood-grain face approved on a physical sample.
70 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.
Discuss This DesignWhy this design works
- Full-width horizontal pull as the proportion line
- Plain face, no panel divisions
- Pull length scaled to the leaf width
Design details
- Style
- Statement modern
- Material / system
- Steel system with aluminum trim
- Configuration
- Single door
- Door leaf thickness
- 70 mm
- Frame depth
- 90 mm
- Maximum frame sizes by configuration
- Single: 1180 × 2500 mm; unequal double: 1580 × 2500 mm; equal double: 2180 × 2500 mm (overall frame; family limits)
- Core filling
- Aluminum honeycomb or foam filling, selectable
- Glass
- None, solid panel
- Locking
- Multi-point lock with anti-drill cylinder
- Smart lock
- Smart lock compatible
A Horizontal Pull Sets the Leaf's Proportion
On a plain face, a long horizontal pull creates a second horizontal datum, and that datum is what gives the door its proportion. Sit it in the upper third and the leaf reads taller; sit it low and the door looks squat however tall it actually is. Its length is read as a fraction of the leaf width, so the bar is specified against the opening rather than picked from a standard size.
A bar that long also has leverage. The fixings are at both ends with the reinforcement spanning between them, and that span is built into the leaf before it is pressed. It is the reason the handle has to be chosen at the same time as the leaf rather than after the door arrives — a longer bar later means new fixing centres and a new backing, which is a rebuild rather than a swap.
Specification & ordering
Steel Entry Door Specifications and Ordering
Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.
Maximum Frame Sizes by Door Construction
Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.
| Door construction | Single leaf | Unequal double leaf | Equal double leaf |
|---|---|---|---|
| Steel Entry Doors | 1180 × 2500 mm | 1580 × 2500 mm | 2180 × 2500 mm |
These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.
Technical specification
- Door leaf
- 1.0 mm galvanized steel sheet
- Frame
- 2.0 mm galvanized steel
- Core
- Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
- Configuration
- Single or double leaf, with or without glass
- Glazing
- None, solid panel
- Finish
- Wood-grain transfer, powder coat or custom finish
Ordering & supply
- Minimum order quantity
- 1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
- Sample lead time
- 25 days
- Production lead time
- 30–45 days
- Container loading
- Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
- Factory inspection
- Third-party factory inspection welcome
- Trade terms
- FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
- Warranty
- 3 years on structure; 1 year on hardware and electronic lock components
Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size.
Image gallery
Frequently asked questions
Can the pull span the full leaf?
Yes, the bar length is set from the leaf width, up to the full face.
Is a back-to-back pull available?
Yes, an internal matching bar can be fitted for double-sided operation.
Can this design be custom sized?
Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.
Which materials and finishes are available?
This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.
How do I specify this door for a project?
Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.
Related collections
Planning an entrance around this design?
Share your opening dimensions, finish preferences and configuration needs with our team.
Start an inquiry
Jmr-2003
JMR-2103
J-2008