Door Design · Jmr-2003

Entrance Door with Sculptural Pull Handle

Jmr-2003 treats the pull as the design: a sculpted handle stands proud of a quiet satin face, so the entrance gets one strong gesture and nothing competing with it. Built to order in steel system with aluminum trim, Jmr-2003 takes its 70 mm leaf and 90 mm frame from the opening survey rather than a stock size, with the powder-coated steel with a lacquered or wood-grain face approved on a physical sample.

70 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.

Discuss This Design
Entrance Door with Sculptural Pull Handle

Why this design works

  • Sculpted pull cast as a single raised form
  • Quiet satin face behind the handle
  • Elegant Steel collection detailing and trim

Design details

Style
Sculptural modern
Material / system
Steel system with aluminum trim
Configuration
Single door
Door leaf thickness
70 mm
Frame depth
90 mm
Maximum frame sizes by configuration
Single: 1180 × 2500 mm; unequal double: 1580 × 2500 mm; equal double: 2180 × 2500 mm (overall frame; family limits)
Core filling
Aluminum honeycomb or foam filling, selectable
Glass
None, solid panel
Locking
Multi-point lock with anti-drill cylinder
Smart lock
Smart lock compatible

One Gesture: Why the Face Stays Quiet

Everything on this door is suppressed so that the pull can be the only event. No panels, no fluting, no applied moulding: a satin face and one sculpted handle standing proud of it. The risk with that approach is scale. A pull that measures 200 mm on a detail drawing can look undersized on a 2.4 m leaf, so it is sized as a proportion of the leaf rather than chosen from a handle range, and the same model in two lengths reads as two different designs.

A proud pull also behaves like a small lever, so it is fixed into reinforcement inside the leaf with a backing plate behind the 1.0 mm skin, and that reinforcement is positioned before the leaf is pressed. Change the handle after the door is made and the fixing centres no longer match the backing, which turns a five-minute swap into a factory job.

Specification & ordering

Steel Entry Door Specifications and Ordering

Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.

Maximum Frame Sizes by Door Construction

Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.

Door constructionSingle leafUnequal double leafEqual double leaf
Steel Entry Doors1180 × 2500 mm1580 × 2500 mm2180 × 2500 mm

These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.

Technical specification

Door leaf
1.0 mm galvanized steel sheet
Frame
2.0 mm galvanized steel
Core
Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
Configuration
Single or double leaf, with or without glass
Glazing
None, solid panel
Finish
Wood-grain transfer, powder coat or custom finish

Ordering & supply

Minimum order quantity
1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
Sample lead time
25 days
Production lead time
30–45 days
Container loading
Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
Factory inspection
Third-party factory inspection welcome
Trade terms
FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
Warranty
3 years on structure; 1 year on hardware and electronic lock components

Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size.

Image gallery

Frequently asked questions

Can the pull be specified in another finish?

Yes, the pull is available in satin, matte black and brushed bronze.

Is the pull comfortable for daily use?

The form is sized for a full hand grip and sits clear of the leaf face.

Can this design be custom sized?

Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.

Which materials and finishes are available?

This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.

How do I specify this door for a project?

Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.

Related collections

Planning an entrance around this design?

Share your opening dimensions, finish preferences and configuration needs with our team.

Start an inquiry