Door Design · J-2006

Fluted Steel Door with Brushed Gold Handle

J-2006 covers the whole leaf in fluting and sets a brushed gold pull against it, so the entrance gains a vertical rhythm and a single warm accent at the hand. Built to order in steel system with aluminum trim, J-2006 takes its 70 mm leaf and 90 mm frame from the opening survey rather than a stock size, with the powder-coated steel with a lacquered or wood-grain face approved on a physical sample.

70 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.

Discuss This Design
Fluted Steel Door with Brushed Gold Handle

Why this design works

  • Full-surface fluting, floor to head
  • Brushed gold pull as the only decorative element
  • Texture reads as shadow rather than applied trim

Design details

Style
Deco modern
Material / system
Steel system with aluminum trim
Configuration
Single door
Door leaf thickness
70 mm
Frame depth
90 mm
Maximum frame sizes by configuration
Single: 1180 × 2500 mm; unequal double: 1580 × 2500 mm; equal double: 2180 × 2500 mm (overall frame; family limits)
Core filling
Aluminum honeycomb or foam filling, selectable
Glass
None, solid panel
Locking
Multi-point lock with anti-drill cylinder
Smart lock
Smart lock compatible

Full-Height Fluting and the Pull That Interrupts It

The fluting runs the full leaf, which means the pull has no plain field to sit in — it has to land on the flutes. There are only two clean ways to do that: stop the flutes above and below the pull to create a recessed plain field, or set the pull parallel between two flutes so its edges follow the module. Anything else produces a shadow line that cuts across the pattern at an angle.

That makes the flute pitch the first decision, not the last. Pitch sets how many flutes cross the leaf, where the pull can sit, and how the pattern resolves at the head and sill. Pitch is also bounded by the leaf: at 70 mm with a 1.0 mm skin over a honeycomb core, the flute depth is limited, so a deep, sharp flute is a thicker-leaf door rather than a press setting.

Specification & ordering

Steel Entry Door Specifications and Ordering

Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.

Maximum Frame Sizes by Door Construction

Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.

Door constructionSingle leafUnequal double leafEqual double leaf
Steel Entry Doors1180 × 2500 mm1580 × 2500 mm2180 × 2500 mm

These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.

Technical specification

Door leaf
1.0 mm galvanized steel sheet
Frame
2.0 mm galvanized steel
Core
Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
Configuration
Single or double leaf, with or without glass
Glazing
None, solid panel
Finish
Wood-grain transfer, powder coat or custom finish

Ordering & supply

Minimum order quantity
1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
Sample lead time
25 days
Production lead time
30–45 days
Container loading
Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
Factory inspection
Third-party factory inspection welcome
Trade terms
FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
Warranty
3 years on structure; 1 year on hardware and electronic lock components

Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size. Full series specification: Steel Entry Door.

Image gallery

Frequently asked questions

Is the gold handle solid brass?

The pull is stainless steel with a brushed gold PVD finish, which keeps its colour outdoors.

Can the handle position be moved?

Yes, handle height and offset are set from your drawing and the project's accessibility requirement.

Can this design be custom sized?

Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.

Which materials and finishes are available?

This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.

How do I specify this door for a project?

Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.

Planning an entrance around this design?

Share your opening dimensions, finish preferences and configuration needs with our team.

Start an inquiry