Door Design · J-2009

Fluted Steel Entry Door with Aluminum Panel

J-2009 runs a vertical fluted aluminum panel down the centre of a steel leaf, so the entrance shows a fine ribbed shadow at close range and a clean edge from the street. J-2009 is manufactured as a single door on a steel system with an aluminum trim. Nothing is cut until the opening is surveyed, and the powder-coated steel with a lacquered or wood-grain face is signed off against a sample.

70 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.

Discuss This Design
Fluted Steel Entry Door with Aluminum Panel

Why this design works

  • Vertical fluting pressed at constant depth
  • Flush pull leaves the ribbing uninterrupted
  • Steel core for apartment and townhouse entrances

Design details

Style
Modern fluted
Material / system
Steel system with aluminum trim
Configuration
Single door
Door leaf thickness
70 mm
Frame depth
90 mm
Maximum frame sizes by configuration
Single: 1180 × 2500 mm; unequal double: 1580 × 2500 mm; equal double: 2180 × 2500 mm (overall frame; family limits)
Core filling
Aluminum honeycomb or foam filling, selectable
Glass
None, solid panel
Locking
Multi-point lock with anti-drill cylinder
Smart lock
Smart lock compatible

An Aluminium Panel Set Into a Steel Leaf

Two metals in one leaf: a fluted aluminium panel down the centre, steel either side. The panel is the only place the door shows a fine ribbed shadow, and it reads at close range precisely because the surrounding steel is smooth. What makes or breaks it is the margin — the width of steel left at each side. Set the panel and margins as a ratio of the leaf width and the entrance looks composed; set the panel to a fixed width and the margins change with every opening size.

The two metals also move differently. Aluminium expands roughly twice as much as steel over the same temperature range, so the panel cannot be a tight fit in the steel opening — it needs a movement allowance at its edges, usually read as a shadow gap. That gap is why the panel looks deliberately inset rather than flush, and it is the detail to protect when the finish is changed late in the project.

Specification & ordering

Steel Entry Door Specifications and Ordering

Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.

Maximum Frame Sizes by Door Construction

Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.

Door constructionSingle leafUnequal double leafEqual double leaf
Steel Entry Doors1180 × 2500 mm1580 × 2500 mm2180 × 2500 mm

These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.

Technical specification

Door leaf
1.0 mm galvanized steel sheet
Frame
2.0 mm galvanized steel
Core
Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
Configuration
Single or double leaf, with or without glass
Glazing
None, solid panel
Finish
Wood-grain transfer, powder coat or custom finish

Ordering & supply

Minimum order quantity
1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
Sample lead time
25 days
Production lead time
30–45 days
Container loading
Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
Factory inspection
Third-party factory inspection welcome
Trade terms
FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
Warranty
3 years on structure; 1 year on hardware and electronic lock components

Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size. Full series specification: Steel Entry Door.

Image gallery

Frequently asked questions

Does the fluting collect dust?

The ribs are pressed into the panel and coated with the face, so they wipe clean.

Can the fluted panel be full height?

Yes, the panel can run the full leaf height or stop at a horizontal rail; specify on the drawing.

Can this design be custom sized?

Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.

Which materials and finishes are available?

This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.

How do I specify this door for a project?

Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.

Planning an entrance around this design?

Share your opening dimensions, finish preferences and configuration needs with our team.

Start an inquiry