Door Design · J-2007
Sandalwood grain steel entry door with a warm mid-tone face
J-2007 uses a sandalwood grain to warm a minimal steel leaf, giving a mid-tone frontage that sits easily beside brick, render or stone. J-2007 is manufactured as a single door on a steel system with an aluminum trim. Nothing is cut until the opening is surveyed, and the powder-coated steel with a lacquered or wood-grain face is signed off against a sample.
70 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.
Discuss This DesignWhy this design works
- Sandalwood grain with visible linear figure
- Slim vertical pull keeps the face quiet
- Mid-tone finish suits brick and render facades
Design details
- Style
- Warm minimal
- Material / system
- Steel system with aluminum trim
- Configuration
- Single door
- Door leaf thickness
- 70 mm
- Frame depth
- 90 mm
- Maximum frame sizes by configuration
- Single: 1180 × 2500 mm; unequal double: 1580 × 2500 mm; equal double: 2180 × 2500 mm (overall frame; family limits)
- Core filling
- Aluminum honeycomb or foam filling, selectable
- Glass
- None, solid panel
- Locking
- Multi-point lock with anti-drill cylinder
- Smart lock
- Smart lock compatible
A Mid-Tone Grain and the Frontage It Sits Against
Sandalwood is a mid-tone warm grain, and the reason it works on a minimal leaf is that it does not compete with the wall. Against red brick it sits back; against pale render it warms the elevation; against stone it picks up the same yellow-brown. The variable that ruins the effect is sheen rather than colour — a satin grain reads as timber, a gloss one reads as laminate, and the two can be the same colour on the same sample card.
As a single leaf this is the version to specify where the opening is narrow, because the 2180 mm maximum overall frame width is an equal-double steel-door figure and a single leaf at that width would be a very heavy panel on three hinges. Widen the opening past the single-leaf practical range and the design moves to a pair, which changes where the grain is cut — the two leaves then have to come off the same run so the figure continues across the joint.
Specification & ordering
Steel Entry Door Specifications and Ordering
Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.
Maximum Frame Sizes by Door Construction
Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.
| Door construction | Single leaf | Unequal double leaf | Equal double leaf |
|---|---|---|---|
| Steel Entry Doors | 1180 × 2500 mm | 1580 × 2500 mm | 2180 × 2500 mm |
These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.
Technical specification
- Door leaf
- 1.0 mm galvanized steel sheet
- Frame
- 2.0 mm galvanized steel
- Core
- Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
- Configuration
- Single or double leaf, with or without glass
- Glazing
- None, solid panel
- Finish
- Wood-grain transfer, powder coat or custom finish
Ordering & supply
- Minimum order quantity
- 1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
- Sample lead time
- 25 days
- Production lead time
- 30–45 days
- Container loading
- Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
- Factory inspection
- Third-party factory inspection welcome
- Trade terms
- FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
- Warranty
- 3 years on structure; 1 year on hardware and electronic lock components
Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size. Full series specification: Steel Entry Door.
Image gallery
Frequently asked questions
How close is the grain to real sandalwood?
The transfer film reproduces the linear figure of sandalwood; send a reference and we will match the tone.
Is this door suitable for coastal sites?
Yes, the steel is powder-coated before the grain is applied, which is the correct build for salt-air locations.
Can this design be custom sized?
Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.
Which materials and finishes are available?
This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.
How do I specify this door for a project?
Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.
Related designs
Planning an entrance around this design?
Share your opening dimensions, finish preferences and configuration needs with our team.
Start an inquiry
JT-02
J-2009
J-2002