Door Design · J-2015
Pressed-pattern steel entry door with horizontal dividing rails
J-2015 presses a repeating pattern into the steel face and separates it with horizontal rails, so the door reads as a composed elevation rather than a flat panel. Each J-2015 is made to the project opening: 70 mm leaf, 90 mm frame, steel system with an aluminum trim. The powder-coated steel with a lacquered or wood-grain face can be matched to the existing facade before production.
70 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.
Discuss This DesignWhy this design works
- Repeating pressed pattern, no applied mouldings
- Horizontal rails divide the leaf into readable bands
- Pattern depth survives coating and cleaning
Design details
- Style
- Graphic modern
- Material / system
- Steel system with aluminum trim
- Configuration
- Single door
- Door leaf thickness
- 70 mm
- Frame depth
- 90 mm
- Maximum frame sizes by configuration
- Single: 1180 × 2500 mm; unequal double: 1580 × 2500 mm; equal double: 2180 × 2500 mm (overall frame; family limits)
- Core filling
- Aluminum honeycomb or foam filling, selectable
- Glass
- None, solid panel
- Locking
- Multi-point lock with anti-drill cylinder
- Smart lock
- Smart lock compatible
Horizontal Rails Set the Rhythm; the Press Sets the Scale
The horizontal rails are what the eye reads first, because they divide the leaf into bands. The pressed pattern is second: it sets the scale within each band. That order matters when the door is resized, because the rails can move and the pattern repeat cannot — the repeat has to divide into the band height, or the top and bottom bands end with a partial row that looks like a mistake rather than a detail.
Depth is the other constraint. The pattern is pressed into a 1.0 mm galvanised skin over a honeycomb or foam core, so the relief is bounded by how much the thin skin will take before it telegraphs through to the inside face. A bolder pattern is therefore a heavier skin, not a deeper press, and that changes the leaf weight the hinges are sized against.
Specification & ordering
Steel Entry Door Specifications and Ordering
Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.
Maximum Frame Sizes by Door Construction
Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.
| Door construction | Single leaf | Unequal double leaf | Equal double leaf |
|---|---|---|---|
| Steel Entry Doors | 1180 × 2500 mm | 1580 × 2500 mm | 2180 × 2500 mm |
These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.
Technical specification
- Door leaf
- 1.0 mm galvanized steel sheet
- Frame
- 2.0 mm galvanized steel
- Core
- Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
- Configuration
- Single or double leaf, with or without glass
- Glazing
- None, solid panel
- Finish
- Wood-grain transfer, powder coat or custom finish
Ordering & supply
- Minimum order quantity
- 1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
- Sample lead time
- 25 days
- Production lead time
- 30–45 days
- Container loading
- Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
- Factory inspection
- Third-party factory inspection welcome
- Trade terms
- FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
- Warranty
- 3 years on structure; 1 year on hardware and electronic lock components
Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size. Full series specification: Steel Entry Door.
Image gallery
Frequently asked questions
Can the pattern be scaled?
Yes, the repeat can be enlarged or reduced to suit the door width.
Does the pressed pattern weaken the leaf?
No, the pattern is formed into the steel skin over a continuous core, so structural performance is unchanged.
Can this design be custom sized?
Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.
Which materials and finishes are available?
This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.
How do I specify this door for a project?
Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.
Related designs
Planning an entrance around this design?
Share your opening dimensions, finish preferences and configuration needs with our team.
Start an inquiry
JT-02
J-2009
J-2002