Door Design · J-2662
Unequal Double Steel Entrance Door with Arched Panels
J-2662 is an unequal double door: a wide main leaf that takes the handle and the lock, closed against a narrow secondary leaf. The two leaves share one panel rhythm — an arched head over a rectangular field on the main leaf, repeated at reduced width on the narrow leaf — so the pair reads as a single elevation rather than a door with a panel added beside it. The leaf is 90 mm in a steel system and the frame is closed with an aluminium trim line; both faces are finished in matte charcoal and every panel is solid.
90 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.
Discuss This DesignWhy this design works
- Unequal leaf pair: wide main leaf, narrow secondary leaf
- 90 mm steel leaf closed with an aluminium trim line
- Arched recessed head carried across both leaves
Design details
- Style
- Arched panel
- Material / system
- Steel system with aluminum trim
- Configuration
- Unequal double leaf
- Door leaf thickness
- 90 mm
- Frame depth
- 90 mm
- Maximum frame sizes by configuration
- Single: 1180 × 2500 mm; unequal double: 1580 × 2500 mm; equal double: 2180 × 2500 mm (overall frame; family limits)
- Core filling
- Aluminum honeycomb or foam filling, selectable
- Glass
- None, solid panels
- Locking
- Multi-point lock with anti-drill cylinder
- Smart lock
- Smart lock compatible
Why the Split Between the Two Leaves Decides the Whole Elevation
In an unequal pair the two leaves have to read as one door while carrying different widths. The arched head is drawn against the main leaf because that is where the eye lands; the narrow leaf then repeats the same arch at a reduced width. If the two heads are scaled independently the pair stops looking like a door and starts looking like a door with a side panel bolted on, which is why the alignment is settled leaf by leaf on a full-size elevation before any panel is formed.
The 90 mm leaf sets how much return depth the face has to work with. A recessed field needs a deep enough return to hold the stepped aluminium trim without the steel skin thinning at the corner of the panel, so the trim runs as one continuous band around the frame and turns into the panel edges instead of sitting proud of them. The panels are solid throughout and there is no glazing rebate, so the elevation is decided entirely by where the panel lines sit.
Specification & ordering
Steel Entry Door Specifications and Ordering
Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.
Maximum Frame Sizes by Door Construction
Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.
| Door construction | Single leaf | Unequal double leaf | Equal double leaf |
|---|---|---|---|
| Steel Entry Doors | 1180 × 2500 mm | 1580 × 2500 mm | 2180 × 2500 mm |
These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.
Technical specification
- Door leaf
- 1.0 mm galvanized steel sheet
- Frame
- 2.0 mm galvanized steel
- Core
- Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
- Configuration
- Single or double leaf, with or without glass
- Glazing
- None, solid panels
- Finish
- Wood-grain transfer, powder coat or custom finish
Ordering & supply
- Minimum order quantity
- 1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
- Sample lead time
- 25 days
- Production lead time
- 30–45 days
- Container loading
- Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
- Factory inspection
- Third-party factory inspection welcome
- Trade terms
- FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
- Warranty
- 3 years on structure; 1 year on hardware and electronic lock components
Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size. Full series specification: Steel Entry Door.
Image gallery
Frequently asked questions
What does unequal double leaf mean?
One wide leaf carries the handle and lock, and a narrower leaf closes against it. It lets a wide opening keep a full-size main leaf instead of splitting the width into two equal halves.
Can the split between the leaves be changed?
Yes. The proportion between the main leaf and the narrow leaf is set on the drawing to suit the opening width and where the hardware has to land.
Can this design be custom sized?
Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.
Which materials and finishes are available?
This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.
How do I specify this door for a project?
Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.
Related designs
Planning an entrance around this design?
Share your opening dimensions, finish preferences and configuration needs with our team.
Start an inquiry
JT-02
J-2009
J-2002